<?xml version="1.0" encoding="UTF-8"?>
<rss version="2.0"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>HowIFixedIt.Net &#187; Hardware</title>
	<atom:link href="http://howifixedit.net/category/technology/computers/hardware/feed/" rel="self" type="application/rss+xml" />
	<link>http://howifixedit.net</link>
	<description>... Because Broken Is Not An Option.</description>
	<lastBuildDate>Sat, 25 Feb 2012 06:16:56 +0000</lastBuildDate>
	<language>en</language>
	<sy:updatePeriod>hourly</sy:updatePeriod>
	<sy:updateFrequency>1</sy:updateFrequency>
	<generator>http://wordpress.org/?v=3.3.1</generator>
		<item>
		<title>How to install CentOS 6 using remote install over the internet &#8211; aka Net Install</title>
		<link>http://howifixedit.net/2012/02/install-centos-6-remote-install-internet-aka-net-install/</link>
		<comments>http://howifixedit.net/2012/02/install-centos-6-remote-install-internet-aka-net-install/#comments</comments>
		<pubDate>Mon, 20 Feb 2012 00:17:04 +0000</pubDate>
		<dc:creator>HowIFixedIt</dc:creator>
				<category><![CDATA[Computers]]></category>
		<category><![CDATA[Hardware]]></category>
		<category><![CDATA[Internet]]></category>
		<category><![CDATA[Software]]></category>
		<category><![CDATA[Technology]]></category>
		<category><![CDATA[CentOs]]></category>
		<category><![CDATA[centos 6]]></category>
		<category><![CDATA[CentOS 6 Default Installation Options]]></category>
		<category><![CDATA[centos 6 url install]]></category>
		<category><![CDATA[centos install]]></category>
		<category><![CDATA[centos net install]]></category>
		<category><![CDATA[centos url install]]></category>
		<category><![CDATA[CentOS-6.2-x86_64-netinstall.iso]]></category>
		<category><![CDATA[install]]></category>
		<category><![CDATA[install centos 6 over the internet]]></category>
		<category><![CDATA[install centos over the internet]]></category>
		<category><![CDATA[net]]></category>
		<category><![CDATA[net install]]></category>
		<category><![CDATA[remote]]></category>
		<category><![CDATA[remote install]]></category>
		<category><![CDATA[vmware]]></category>

		<guid isPermaLink="false">http://howifixedit.net/?p=1033</guid>
		<description><![CDATA[If you want to install CentOS 6 using remote install there are few easy steps.  First you need the CentOS 6 net install CentOS-6.2-x86_64-netinstall.iso which is about 227 mb.  You can get it here: http://centos.netnitco.net/6.2/isos/x86_64/CentOS-6.2-x86_64-netinstall.iso Next you burn the cd or  [...]]]></description>
			<content:encoded><![CDATA[<p>If you want to install CentOS 6 using remote install there are few easy steps.  First you need the CentOS 6 net install CentOS-6.2-x86_64-netinstall.iso which is about 227 mb.  You can get it here: <a href="http://centos.netnitco.net/6.2/isos/x86_64/CentOS-6.2-x86_64-netinstall.iso">http://centos.netnitco.net/6.2/isos/x86_64/CentOS-6.2-x86_64-netinstall.iso</a> Next you burn the cd or mount the iso in a virtual machine and boot up the system.  When it asks where your install media can be located you select &#8220;URL&#8221;. Next, use either of the following paths:</p>
<pre><strong>32 bit:</strong> http://mirror.centos.org/centos/6/os/i386/
<strong>64 bit:</strong> http://mirror.centos.org/centos/6/os/x86_64/

If these dont work you can try these:

<a href="http://mirror.centos.org/centos/6.0/os/x86_64/images/" rel="nofollow">http://mirror.centos.org/centos/6.0/os/x86_64/images/</a>
<a href="http://mirror.centos.org/centos/6.0/os/i386/images/" rel="nofollow">http://mirror.centos.org/centos/6.0/os/i386/images/</a></pre>
<p><a href="http://howifixedit.net/wp-content/uploads/2012/02/centos6-URL.png" rel="lightbox[1033]"><img class="alignnone size-full wp-image-1035" title="centos6-URL" src="http://howifixedit.net/wp-content/uploads/2012/02/centos6-URL.png" alt="" width="560" height="288" /></a></p>
<p>&nbsp;</p>
<p>Finally hit next and you should be on your way.  The install should continue as normal and everything the system needs to complete the install will be downloaded and installed.</p>
<p>This was originally designed so you could host the install files on your local network or ftp server but works just as well over the internet.  This is especially useful if you want to do a minimal install so you don&#8217;t have to download the entire 4+GB ISO file.</p>
]]></content:encoded>
			<wfw:commentRss>http://howifixedit.net/2012/02/install-centos-6-remote-install-internet-aka-net-install/feed/</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>How-To Fix: Content On Computer Extender Not Updating on XBOX 360</title>
		<link>http://howifixedit.net/2010/03/howto-fix-content-computer-extender-updating-xbox-360/</link>
		<comments>http://howifixedit.net/2010/03/howto-fix-content-computer-extender-updating-xbox-360/#comments</comments>
		<pubDate>Mon, 22 Mar 2010 07:37:13 +0000</pubDate>
		<dc:creator>HowIFixedIt</dc:creator>
				<category><![CDATA[Computers]]></category>
		<category><![CDATA[Hardware]]></category>
		<category><![CDATA[Technology]]></category>
		<category><![CDATA[apply media information changes]]></category>
		<category><![CDATA[extender]]></category>
		<category><![CDATA[media]]></category>
		<category><![CDATA[update]]></category>
		<category><![CDATA[windows]]></category>
		<category><![CDATA[windows 7]]></category>
		<category><![CDATA[windows xp]]></category>
		<category><![CDATA[xbox]]></category>
		<category><![CDATA[xbox360]]></category>

		<guid isPermaLink="false">http://howifixedit.net/?p=893</guid>
		<description><![CDATA[
If you play movies or music from your computer through your Xbox 360 you have the computer setup as an XBOX extender.  Over time as you add new content to your computer the Xbox 360 may not update with the new content. To fix this you simply log into your computer in question and bring up Windows  [...]]]></description>
			<content:encoded><![CDATA[<p><a href="http://howifixedit.net/wp-content/uploads/2010/03/xbox360balllogolarge.jpg" rel="lightbox[893]"><img class="alignnone size-thumbnail wp-image-895" title="xbox360balllogolarge" src="http://howifixedit.net/wp-content/uploads/2010/03/xbox360balllogolarge-150x101.jpg" alt="" width="150" height="101" /></a></p>
<p>If you play movies or music from your computer through your Xbox 360 you have the computer setup as an XBOX extender.  Over time as you add new content to your computer the Xbox 360 may not update with the new content. To fix this you simply log into your computer in question and bring up Windows Media Player and select Oragnize &gt; Apply Media Information Changes.</p>
<p><a href="http://howifixedit.net/wp-content/uploads/2010/03/wmp.png" rel="lightbox[893]"><img class="alignnone size-full wp-image-894" title="wmp" src="http://howifixedit.net/wp-content/uploads/2010/03/wmp.png" alt="" width="304" height="266" /></a></p>
<p>Once you have done that your computer (Xbox 360 Extender) will begin to update the library.</p>
<p><a href="http://howifixedit.net/wp-content/uploads/2010/03/wmp1.png" rel="lightbox[893]"><img class="alignnone size-full wp-image-896" title="wmp1" src="http://howifixedit.net/wp-content/uploads/2010/03/wmp1.png" alt="" width="440" height="252" /></a></p>
<p>Once the progress bar hits 100% your media will be updated and you should see all of it on your Xbox 360.</p>

<p>For more info on setting the Extender up, here are the instructions from the Xbox 360 web page.
<a href='http://howifixedit.net/2010/03/howto-fix-content-computer-extender-updating-xbox-360/wmp1/' title='wmp1'><img width="150" height="85" src="http://howifixedit.net/wp-content/uploads/2010/03/wmp1-150x85.png" class="attachment-thumbnail" alt="wmp1" title="wmp1" /></a>
<a href='http://howifixedit.net/2010/03/howto-fix-content-computer-extender-updating-xbox-360/xbox360balllogolarge/' title='xbox360balllogolarge'><img width="150" height="101" src="http://howifixedit.net/wp-content/uploads/2010/03/xbox360balllogolarge-150x101.jpg" class="attachment-thumbnail" alt="xbox360balllogolarge" title="xbox360balllogolarge" /></a>
<a href='http://howifixedit.net/2010/03/howto-fix-content-computer-extender-updating-xbox-360/wmp/' title='wmp'><img width="150" height="131" src="http://howifixedit.net/wp-content/uploads/2010/03/wmp-150x131.png" class="attachment-thumbnail" alt="wmp" title="wmp" /></a>
</p>
<blockquote>
<h1>Connect your console to Windows Media Center</h1>
<div>Before  you can play content from Windows Media Center on your Xbox 360 console,  you need to connect your console to Windows Media Center.</div>
<p><!--</p>
<h3>Top Solutions</h3>
<p>Try this solution. If it doesn&#8217;t work, <a href="http://howifixedit.net/support/en/us/nxe/contactus.aspx" mce_href="/support/en/us/nxe/contactus.aspx">contact Xbox Customer Support</a>. Note that they will ask you try the suggestion on this page first.</p>
<p>&#8211;></p>
<h3>Setting  up Windows Media Center</h3>
<p>To use Windows Media Center with Xbox  360, you must have a computer running Windows Media Center. Windows  Media Center is included with the following versions of Windows:</p>
<ul>
<li>Windows  7 Ultimate, Professional, or Home Premium</li>
<li>Windows Vista  Ultimate or Home Premium</li>
<li>Windows XP Media Center Edition 2005</li>
</ul>
<p><!--</p>
<div style="padding:6px; background-color: #F5F5F5;" mce_style="padding: 6px; background-color: #f5f5f5;">
<p style="margin-top:3px; margin-bottom:3px" mce_style="margin-top: 3px; margin-bottom: 3px;"><b>Note</b></p>
<p>Windows Media Center is not included with Windows XP Home, Windows XP Professional, Windows Vista Home Basic, or Windows Vista Business.</p>
</div>
<p>&#8211;><strong>Step  1: Get Setup Key from Xbox 360</strong></p>
<ol>
<li> On your  console, go to <strong>My Xbox</strong> and select <strong>Windows Media Center</strong>.</li>
<li> Follow the on-screen instructions.</li>
<li>Write down the 8-digit Media Center Setup Key.</li>
</ol>
<p><strong>Step  2: Add an Extender on your computer</strong></p>
<ol>
<li> Start <strong>Windows  Media Center</strong>.</li>
<li> Click <strong>Tasks</strong>,  and then click <strong>Add Extender</strong>.</li>
<li>When prompted,  enter the 8-digit Setup Key from Xbox 360.</li>
<li>Complete the Extender setup</li>
</ol>
</blockquote>
]]></content:encoded>
			<wfw:commentRss>http://howifixedit.net/2010/03/howto-fix-content-computer-extender-updating-xbox-360/feed/</wfw:commentRss>
		<slash:comments>1</slash:comments>
		</item>
		<item>
		<title>Silverstone Sg03 + Gigabyte GA-G33M-DS2R + Intel Q6600 + Zalman CNPS8700 LED = Too Hot?</title>
		<link>http://howifixedit.net/2010/03/silverstone-sg03-gigabyte-ga-g33m-ds2r-intel-q6600-too-hot/</link>
		<comments>http://howifixedit.net/2010/03/silverstone-sg03-gigabyte-ga-g33m-ds2r-intel-q6600-too-hot/#comments</comments>
		<pubDate>Wed, 03 Mar 2010 23:38:49 +0000</pubDate>
		<dc:creator>HowIFixedIt</dc:creator>
				<category><![CDATA[Computers]]></category>
		<category><![CDATA[Hardware]]></category>
		<category><![CDATA[Technology]]></category>
		<category><![CDATA[CNPS8700 LED]]></category>
		<category><![CDATA[GA-G33M-DS2R]]></category>
		<category><![CDATA[Gigabyte]]></category>
		<category><![CDATA[Intel]]></category>
		<category><![CDATA[Q6600]]></category>
		<category><![CDATA[Sg03]]></category>
		<category><![CDATA[Silverstone]]></category>
		<category><![CDATA[Zalman]]></category>

		<guid isPermaLink="false">http://howifixedit.net/?p=167</guid>
		<description><![CDATA[This was something i posted over at HardForums a while back.  It was a problem with getting the temperatures down on a new build.  The build included a Silverstone Sg03 Case, Gigabyte GA-G33M-DS2R motherboard, Zalman CNPS8700 LED HSF, and an Intel Q6600 processor.  The problem with the build was  [...]]]></description>
			<content:encoded><![CDATA[<div>This was something i posted over at HardForums a while back.  It was a problem with getting the temperatures down on a new build.  The build included a Silverstone Sg03 Case, Gigabyte GA-G33M-DS2R motherboard, Zalman CNPS8700 LED HSF, and an Intel Q6600 processor.  The problem with the build was the case was a small form factor case with a small motherboard and a blazing fast (but hot) processor.   The way the case is setup is the power supply sits directly over the CPU and Heatsink and Fan.  The Sg03 is great because you can put the latest processor, full ATX PSU, and full length video cards in it.  The downside is it&#8217;s all packed in such a small area and the temperature are bound to get hot.  To make matters worse, there is very little ventilation in the back side of the case.</div>
<blockquote>
<div><strong>Sg03 + GA-G33M-DS2R + Q6600 = too hot?</strong><br />
(i have a similar post in Overclocking and Cooling but i thought SFF group might have more experience with this type of setup)I have a GA-G33M-DS2R and Q6600 in a Sg03 case, my cooler is a CNPS8700 LED and my temps are really high idle and at load. At first i thought the high temps were because i had applied the Arctic Silver 5 incorrectly ( i spread out the paste on the entire cooler instead of the single line of paste in the middle like Arctic Silver suggests.) I also tried moving the case fan to blow more directly on the CPU (stock configuration has the case fan in the middle) Temps didn&#8217;t really change much.</p>
<p>Here are my temps with no overclocking.</p>
<p>SpeedFan 4.32<br />
Idle: 37C, 35C, 33C, 33C<br />
Load (after 20min of Orthos): 76C, 75C, 75C, 75C</p>
<p>CoreTemp 0.95<br />
Idle 52C, 50C, 48C, 47C<br />
load (after 20min Orthos): 91C, 90C, 90C, 90C</p>
<p>TJunction on this CPU is 100C</p>
<p>The next step i&#8217;ve found to reduce my temps would be to remove the CPU retention clip so there will be better contact between the heatsink and CPU. i might try lapping as well.</p>
<p>here is the clip i&#8217;m talking about and an example of someone that did it::</p>
<p>http://forums.guru3d.com/showthread.php?t=229063</p>
</div>
</blockquote>
<div>To solve the problem i tried a few things.  First, i went with the CNPS8700 LED over the stock heatsink which  brought the temps down a couple degrees. My q6600 has the old stepping so it ran a little hotter. Both heatsinks worked fine, i initially bought the CNPS8700 LED because i thought the stock heatsink wouldn&#8217;t fit. The CNPS8700 LED dropped the temps by a few degrees so depending if that decrease in temperature is worth it to you, you may just want to go with the stock HSF. If i was building the computer again i would have saved the money on the Zalman CNPS8700 LED.</div>
<div>I ended up not touching the cpu retention clip because it didnt seem like it was causing the problem. The high temps were because i didnt apply the thermal grease optimally. If you have arctic silver 5, check the website for the proper way to apply the grease. You can see it here.</div>
<div></div>
<div>Another thing that really helped the temps was putting a slot cooler in the top slot above the power supply. i put mine in with a fan regulator to keep the noise down. When the case is upright, the cpu is close to that area, and since heat rises, the slot cooler does a good job exhausting heat from the case.<br />
The final temps using CoreTemp V.95 were:</div>
<div>
<p>Idle:<br />
42 degrees to TJunction remaining<br />
44 degrees to TJunction remaining<br />
46 degrees to TJunction remaining<br />
48 degrees to TJunction remaining</p>
<p>Full Load:<br />
26 degrees to TJunction remaining<br />
27 degrees to TJunction remaining<br />
28 degrees to TJunction remaining<br />
28 degrees to TJunction remaining</p>
<p>The build also had two 120mm scythe fans up front and the fan controlled slot cooler in the top rear like i mentioned earlier. As you can see the temps run sorta high but not too high. The system is 100% stable. I did not do any overclocking and the system is extremely quiet. I also had tried flipping the PSU so its fan can help exhaust the CNPS8700 LED but it really didn&#8217;t make a difference. Overall i was happy with the build and would pick the same parts again.</p>
</div>
<div>

<a href='http://howifixedit.net/2010/03/silverstone-sg03-gigabyte-ga-g33m-ds2r-intel-q6600-too-hot/ga-g33-m-d2sr/' title='Gigabyte ga-g33-m-d2sr Motherboard'><img width="147" height="150" src="http://howifixedit.net/wp-content/uploads/2010/03/ga-g33-m-d2sr-147x150.jpg" class="attachment-thumbnail" alt="Gigabyte ga-g33-m-d2sr Motherboard" title="Gigabyte ga-g33-m-d2sr Motherboard" /></a>
<a href='http://howifixedit.net/2010/03/silverstone-sg03-gigabyte-ga-g33m-ds2r-intel-q6600-too-hot/casesilvsg03/' title='Silverstone SG03 Case'><img width="150" height="112" src="http://howifixedit.net/wp-content/uploads/2010/03/CASESILVSG03-150x112.jpg" class="attachment-thumbnail" alt="Silverstone SG03 Case" title="Silverstone SG03 Case" /></a>
<a href='http://howifixedit.net/2010/03/silverstone-sg03-gigabyte-ga-g33m-ds2r-intel-q6600-too-hot/slot0/' title='slot cooler'><img width="150" height="135" src="http://howifixedit.net/wp-content/uploads/2010/03/slot0-150x135.jpg" class="attachment-thumbnail" alt="slot cooler" title="slot cooler" /></a>

</div>
<p><cite title="HardForum Post"><cite title="qw"><cite></cite></cite><cite title="HardForum Post"></cite></cite></p>
]]></content:encoded>
			<wfw:commentRss>http://howifixedit.net/2010/03/silverstone-sg03-gigabyte-ga-g33m-ds2r-intel-q6600-too-hot/feed/</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
		<item>
		<title>Random BSOD With Gigabyte GA-P55A-UD4P Motherboard and Corsair CMX8GX3M4A1600C9 Memory (8gb kit)</title>
		<link>http://howifixedit.net/2010/02/random-bsod-with-gigabyte-ga-p55a-ud4p-motherboard-and-corsair-cmx8gx3m4a1600c9-memory-8gb-kit/</link>
		<comments>http://howifixedit.net/2010/02/random-bsod-with-gigabyte-ga-p55a-ud4p-motherboard-and-corsair-cmx8gx3m4a1600c9-memory-8gb-kit/#comments</comments>
		<pubDate>Sat, 27 Feb 2010 21:30:50 +0000</pubDate>
		<dc:creator>HowIFixedIt</dc:creator>
				<category><![CDATA[Computers]]></category>
		<category><![CDATA[Hardware]]></category>
		<category><![CDATA[Technology]]></category>
		<category><![CDATA[Blue Screen Of Death]]></category>
		<category><![CDATA[BSOD]]></category>
		<category><![CDATA[CMX8GX3M4A1600C9]]></category>
		<category><![CDATA[Corsair]]></category>
		<category><![CDATA[GA-P55A-UD4P]]></category>
		<category><![CDATA[Memtest86]]></category>
		<category><![CDATA[prime95]]></category>
		<category><![CDATA[windows 7]]></category>
		<category><![CDATA[xmp]]></category>

		<guid isPermaLink="false">http://howifixedit.net/?p=140</guid>
		<description><![CDATA[I built a new system using a Gigabyte GA-P55A-UD4P Motherboard and Corsair CMX8GX3M4A1600C9 Memory (8gb kit).  After the install i kept getting random BSOD (Blues Screen of Death) reboots.   I tried letting the bios auto detect  the sticks and the system defaults to 1333mhz.  I tried allowing the  [...]]]></description>
			<content:encoded><![CDATA[<p><a href="http://howifixedit.net/wp-content/uploads/2010/02/GA-P55A-UD4R.png" rel="lightbox[140]"><img class="alignright size-thumbnail wp-image-142" title="GA-P55A-UD4R" src="http://howifixedit.net/wp-content/uploads/2010/02/GA-P55A-UD4R-150x150.jpg" alt="" width="150" height="150" /></a><a href="http://howifixedit.net/wp-content/uploads/2010/02/518eKupK2CL._SL500_AA280_.jpg" rel="lightbox[140]"><img class="alignright size-thumbnail wp-image-143" title="CMX8GX3M4A1600C9" src="http://howifixedit.net/wp-content/uploads/2010/02/518eKupK2CL._SL500_AA280_-150x150.jpg" alt="" width="150" height="150" /></a>I built a new system using a Gigabyte GA-P55A-UD4P Motherboard and Corsair CMX8GX3M4A1600C9 Memory (8gb kit).  After the install i kept getting random BSOD (Blues Screen of Death) reboots.   I tried letting the bios auto detect  the sticks and the system defaults to 1333mhz.  I tried allowing the BIOS to enable the XMP profile which recognizes them as 1600mhz (which they are rated at). I also tried other bios settings and was still experiencing random reboots.  I even ran memtest86+ for over 10  hours and  the memory checked out fine;   also ran prime95 for several  hours and  the system was rock solid. I did extensive troubleshooting  within windows (examining minidumps, changing drivers, etc) to no avail.  I even bought a new kit of the same RAM and ran the same tests, same problem.  At this point, you would think, the ram was not compatible with this board but after extensive searching i found the following page on Tomshardware:<br />
<a href="http://www.tomshardware.com/forum/266033-30-ud3r-random-reboots" target="_blank">http://www.tomshardware.com/forum/266033-30-ud3r-random-reboots<br />
</a></p>
<p><strong>(NOTE: Tom&#8217;s Hardware won&#8217;t let me directly link to it so copy and paste the link to see it)<br />
</strong></p>
<p>Take note of Bilbat&#8217;s post and craigusoz post. The instability with this Corsair RAM and the Gigabyte boards seems to have to do with the CPU  EIST / C1E / C3/6/7 / turbo boost support functions found in the BIOS.</p>
<p>My problems were solved tweaking these bios settings. Turing on or off some of these CPU power saving functions may not be ideal but were good enough for me.  100% stable now.</p>
<p>Note: I was experiencing random BSOD on windows 7 x64. my board is GA-P55A-UD4P  and my memory was <a href="http://www.amazon.com/gp/product/B002LE8D2U?ie=UTF8&#038;tag=howifixeditne-20&#038;linkCode=as2&#038;camp=1789&#038;creative=9325&#038;creativeASIN=B002LE8D2U">Corsair CMX8GX3M4A1600C9 XMS3 8 GB PC3-12800 Core i5 Memory Kit</a><img src="http://www.assoc-amazon.com/e/ir?t=howifixeditne-20&#038;l=as2&#038;o=1&#038;a=B002LE8D2U&#038;lt1=_new" width="1" height="1" border="0" alt="" style="border:none !important; margin:0px !important;" /><br />
 8gb kit was CMX8GX3M4A1600C9.</p>
<p><a href="http://www.amazon.com/gp/product/B002LE8D2U?ie=UTF8&#038;tag=howifixeditne-20&#038;linkCode=as2&#038;camp=1789&#038;creative=9325&#038;creativeASIN=B002LE8D2U"><img border="0" src="518eKupK2CL._SL160_.jpg"></a><img src="http://www.assoc-amazon.com/e/ir?t=howifixeditne-20&#038;l=as2&#038;o=1&#038;a=B002LE8D2U" width="1" height="1" border="0" alt="" style="border:none !important; margin:0px !important;" /></p>
<p><code><SCRIPT charset="utf-8" type="text/javascript" src="http://ws.amazon.com/widgets/q?ServiceVersion=20070822&#038;MarketPlace=US&#038;ID=V20070822/US/howifixeditne-20/8005/219d1fba-670e-4bc4-9cb6-2c43120967f3"> </SCRIPT> <NOSCRIPT><A HREF="http://ws.amazon.com/widgets/q?ServiceVersion=20070822&#038;MarketPlace=US&#038;ID=V20070822%2FUS%2Fhowifixeditne-20%2F8005%2F219d1fba-670e-4bc4-9cb6-2c43120967f3&#038;Operation=NoScript">Amazon.com Widgets</A></NOSCRIPT></code></p>
]]></content:encoded>
			<wfw:commentRss>http://howifixedit.net/2010/02/random-bsod-with-gigabyte-ga-p55a-ud4p-motherboard-and-corsair-cmx8gx3m4a1600c9-memory-8gb-kit/feed/</wfw:commentRss>
		<slash:comments>1</slash:comments>
		</item>
		<item>
		<title>Western Digital Raptor HD Vs Intel X25-M SSD</title>
		<link>http://howifixedit.net/2010/02/raptor-hd-vs-samsung-ssd/</link>
		<comments>http://howifixedit.net/2010/02/raptor-hd-vs-samsung-ssd/#comments</comments>
		<pubDate>Thu, 25 Feb 2010 22:41:03 +0000</pubDate>
		<dc:creator>HowIFixedIt</dc:creator>
				<category><![CDATA[Computers]]></category>
		<category><![CDATA[Hardware]]></category>
		<category><![CDATA[Technology]]></category>
		<category><![CDATA[raptor]]></category>
		<category><![CDATA[ssd]]></category>
		<category><![CDATA[WD1500ADFD]]></category>
		<category><![CDATA[western digital]]></category>
		<category><![CDATA[x25-m]]></category>

		<guid isPermaLink="false">http://sfbaltazar.net/sfblog/?p=51</guid>
		<description><![CDATA[This video shows a Western Digital Raptor hard drive Vs an Intel X25-M SSD when starting a bunch of applications simultaneously.  The speed is amazing.  Too bad the X25-M is still a little too pricey, hopefully SSD&#8217;s come down in price later this year.

Comparison of Western Digital Raptor  [...]]]></description>
			<content:encoded><![CDATA[<p>This video shows a Western Digital Raptor hard drive Vs an Intel X25-M SSD when starting a bunch of applications simultaneously.  The speed is amazing.  Too bad the X25-M is still a little too pricey, hopefully SSD&#8217;s come down in price later this year.</p>
<p><object style="width: 500px; height: 315px;" classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" width="500" height="315" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=6,0,40,0"><param name="src" value="http://www.youtube.com/v/T_Jz7IMwBt4&amp;hl=en_US&amp;fs=1&amp;" /><embed style="width: 500px; height: 315px;" type="application/x-shockwave-flash" width="500" height="315" src="http://www.youtube.com/v/T_Jz7IMwBt4&amp;hl=en_US&amp;fs=1&amp;"></embed></object></p>
<blockquote><p><span>Comparison of Western Digital Raptor WD1500ADFD and Intel X25-M  160GB SSD when starting 51 programs simultaneously in identical  installations of Microsoft Windows Vista SP1 with full of programs and  drivers. First benchmarked the Raptor version, then taken an image of it  and transferred it to the SSD. The Intel SSD was first updated with the  latest firmware.</p>
<p>Computer specifications: English Windows Vista  Ultimate SP1 64 bit operating system, Core i7 920 CPU, 12 GB of DDR3  RAM, Asus P6T-Deluxe motherboard, ATi Radeon HD4870 X2 graphics card.  Newest drivers, all Vista updates to date.</span></p></blockquote>
]]></content:encoded>
			<wfw:commentRss>http://howifixedit.net/2010/02/raptor-hd-vs-samsung-ssd/feed/</wfw:commentRss>
		<slash:comments>1</slash:comments>
		</item>
		<item>
		<title>Unable to set date for the following file &#8230; Second Copy and ReadyNAS Problem</title>
		<link>http://howifixedit.net/2010/02/test-post-2/</link>
		<comments>http://howifixedit.net/2010/02/test-post-2/#comments</comments>
		<pubDate>Wed, 24 Feb 2010 19:28:44 +0000</pubDate>
		<dc:creator>HowIFixedIt</dc:creator>
				<category><![CDATA[Computers]]></category>
		<category><![CDATA[Hardware]]></category>
		<category><![CDATA[Software]]></category>
		<category><![CDATA[Technology]]></category>
		<category><![CDATA[ReadyNAS]]></category>
		<category><![CDATA[ReadyNAS NV+]]></category>
		<category><![CDATA[Second Copy]]></category>

		<guid isPermaLink="false">http://sfbaltazar.net/sfblog/?p=28</guid>
		<description><![CDATA[I ran into this problem when copying files from my windows system to a  ReadyNAS NV+ using any Second  Copy profile.  When i tried to copy files locally up to the  ReadyNAS i kept getting,  &#8220;Unable to set date for the following file  &#8230;&#8221;  in my Second Copy log files.  Turns out the issue was caused   [...]]]></description>
			<content:encoded><![CDATA[<p>I ran into this problem when copying files from my windows system to a  <a title="ReayNAS NV+" href="http://www.netgear.com/Products/Storage/ReadyNASNVPlus.aspx" target="_blank">ReadyNAS NV+</a> using any <a title="SecondCopy" href="http://www.centered.com/" target="_blank">Second  Copy</a> profile.  When i tried to copy files locally up to the  ReadyNAS i kept getting,  &#8220;Unable to set date for the following file  &#8230;&#8221;  in my Second Copy log files.  Turns out the issue was caused  because Second Copy ignores a two second time difference between files  to account for different types of file systems used between systems (Fat  32, NTFS, Unix Based file systems).</p>
<p>To fix the problem, you must edit your Second Copy &#8220;profile.dat&#8221; file  which stores all the program variables. The location on my system was,  &#8220;\Documents and Settings\&lt;currentusername&gt;\Local  Settings\Application Data\Centered Systems\Second Copy&#8221;.</p>
<p>Make  sure the Second Copy program is turned off. You must add  &#8220;IgnoreTimeDifference=2&#8243; to either the [General] section or the  [Options] section. like so:</p>
<p>[General]<br />
&#8230;<br />
[Options]<br />
IgnoreTimeDifference=2</p>
<p>Restart  Second Copy and the problem should be solved.</p>
<p>see more:</p>
<p><a title="http://www.readynas.com/forum/viewtopic.php?p=84020" href="http://www.readynas.com/forum/viewtopic.php?p=84020" target="_blank">http://www.readynas.com/forum/viewtopic.php?p=84020</a></p>
<p>and  here:</p>
<p><a title="http://www.secondcopy.com/kb/article.aspx?id=10169" href="http://www.secondcopy.com/kb/article.aspx?id=10169" target="_blank">http://www.secondcopy.com/kb/article.aspx?id=10169</a></p>
]]></content:encoded>
			<wfw:commentRss>http://howifixedit.net/2010/02/test-post-2/feed/</wfw:commentRss>
		<slash:comments>1</slash:comments>
		</item>
		<item>
		<title>Netbooks and the Lenovo S10</title>
		<link>http://howifixedit.net/2010/02/netbooks-and-the-lenovo-s10/</link>
		<comments>http://howifixedit.net/2010/02/netbooks-and-the-lenovo-s10/#comments</comments>
		<pubDate>Wed, 24 Feb 2010 19:02:26 +0000</pubDate>
		<dc:creator>HowIFixedIt</dc:creator>
				<category><![CDATA[Computers]]></category>
		<category><![CDATA[Hardware]]></category>
		<category><![CDATA[Technology]]></category>
		<category><![CDATA[hackintosh]]></category>
		<category><![CDATA[jolicloud]]></category>
		<category><![CDATA[lenovo]]></category>
		<category><![CDATA[netbook]]></category>
		<category><![CDATA[s10]]></category>
		<category><![CDATA[windows 7]]></category>

		<guid isPermaLink="false">http://sfbaltazar.net/sfblog/?p=12</guid>
		<description><![CDATA[One of my newest toys is the Lenovo S10 Netbook.  I&#8217;ve done a few upgrades and know the system pretty well.  I&#8217;ve tried multiple OS&#8217;s on it; everything from Hackintosh-ing it, to Jolicloud, to plain ol Windows 7.
]]></description>
			<content:encoded><![CDATA[<p>One of my newest toys is the Lenovo S10 Netbook.  I&#8217;ve done a few upgrades and know the system pretty well.  I&#8217;ve tried multiple OS&#8217;s on it; everything from Hackintosh-ing it, to Jolicloud, to plain ol Windows 7.</p>
]]></content:encoded>
			<wfw:commentRss>http://howifixedit.net/2010/02/netbooks-and-the-lenovo-s10/feed/</wfw:commentRss>
		<slash:comments>0</slash:comments>
		</item>
	</channel>
</rss>

